AQUABOND 2K is an acrylic cementitious, polymer modified elastomeric, waterproofing & protective coating composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates.
- AQUABOND 2K can be applied to new or old concrete substrates that are structurally sound
- Can be used waterproof coating for bathrooms, kitchen sinks, balconies, etc.
- Ideal as a coating for waterproofing of chhajjas, canopies, etc.
- As waterproof coating on internal sides of domestic water tanks.
- Good for waterproofing of sloped roofs.
- As a waterproof coating for terraces of areas.
- Elastomeric – elastomeric flexible coating that accommodate cracks up to 2 mm with an elasticity of 40-50%
- Low water permeability – excellent resistance to ingress of water
- Adhesion – excellent adhesion to concrete and masonry surfaces
- Eco-friendly – Non-toxic with low VOC content
- CFTRI certified – as a “potable water safe” coating for waterproofing for water tanks
|Nature and type||2 component (1 part polymer & 2 part powder|
|Wet density of the mix||1.65 – 1.75 gm/ml|
|pH of the mix||10.0 – 12.0|
|Pot life of the mix @300C in minutes||40 minimum|
|Elongation at break at DFT of 1 mm||40% minimum|
|Water permeability||Excellent – 0 leakage observed after 24 hrs.|
|Coverage||Approximately 0.8 – 0.98 Sq.mts / kg.|
Factory sealed bag of this product is guaranteed for first quality for 12 Months. * if stored up in dry area.
Our service include waterproofing, grouting, tile installation and crack Filling.
We have 50+ customer who are well satisfied with our services and products.
VBond came into play of product manufacturing in 2014 but is the raw material suppliler for many other companies who are in the same stream.
VBond products are supplied all over india, when it is in bulk order, we have our own logistics, transportation cost is bared by the customer.
VBOND Products comes out with its own raw materials, products are tested before they are out from the factory, our own logistics.